KOHLER MALLECO TOUCHLESS KITCHEN MIXER - 2 COLOURS
- Unique Response® technology - complete touchless sensor operation
- DockNetik® docking system on pulldown
- Kohler ProMotion® technology sprayhead
- Two-function pulldown sprayhead featuring Sweep Spray and Stream Spray
- 4 minute automatic water shut-off if sensor inactivated
- Swiveling ball joint on sprayhead
- High arch spout design with good clearance
- Ceramic disc valve
- available with both battery powered and plug-in AC adapter* (AC DUE LATE 2021)
- Dual check valve configuration compliant to AS/NZS 3500.1
- Suitable for equal mains pressure
- Supplied with fitted inlet hoses and colour coding for easy installation
- Available in two color finishes
- NZ WELS 5 star @ 6L/m
- Maximum working pressure 500kPa. If it exceeds 500kPa, a pressure limiting valve must be fitted.
- The highest water and environment temperature is 60°C.
- The faucet contains two sets of check valves for backflow prevention. Do not remove them.
- All installations must comply with local plumbing codes and requirements of AS/NZS 3500 and AS/NZS 6400
- Maximum bench thickness is 60mm.
Functional for Everyone
A Range of Styles
Frequently Asked Questions
How long will my order take
Once you place an order with us, if the item is in stock, we will dispatch any orders before 12pm same day. After 12PM the following day. Our couriers are usually overnight, however depending on the courier workload, it can take up to 5 working days.
Any Bigger items by Freight truck usually takes 1-4 working days North Island. 4-8 working days South Island.
What size waste do I need for my bath & basin?
Unless a plumber has speicified a different size,
Basin Wastes are 32MMBath wastes are 40MM
What is the difference between a 12volt and 24volt heated rail and ladders?
What is Low Voltage?
According to the Australia and New Zealand Standards – Electrical Wiring Rules AS/NZS 3000:2018 low voltage is anything "Not exceeding 12 Volts AC or 30 Volts ripple-free DC".
What does “Wet Area Suitable” mean?
Products that are “Wet Area Suitable” have a suitable IP (Ingress Protection) rating that enables them to be installed in what is classified as Zone 1 in the bathroom. See Bathroom Zones
The Australia and New Zealand Standard AS/NZS 3000:2018 identifies the zones in a bathroom and the IP rating required for electrical items installed in each zone. The illustration shown here is a guide only, for full details please refer to Australia and New Zealand Standard AS/NZS 3000:2018.