Rinnai Mains Pressure Enamel Hot Water Cylinder Range - 5 Sizes
Description
The Rinnai Enamel Electric Mains Pressure Range delivers reliable, efficient hot water for modern New Zealand homes. Designed to maintain strong, consistent flow, these cylinders allow, multiple taps or showers to run simultaneously without noticeable pressure drop, making them the preferred choice.
These cylinders can be used in both commercial and outdoor installations. By relocating your hot water storage outdoors, you reclaim valuable interior square footage, enabling kitchen or bathroom renovations without spatial constraints!
Features:
-
Designed with high quality, glass lined (vitreous enamel) inner cylinder. Sturdy
Colourbond ® corrosion resistant steel outer casting, & high density expanded polyurethane foam insulation. - Designed for indoor or outdoor installation
- Specifications can be found in downloads
- cTech ™ Innovative design element allows increased amount of hot water to be delivered
- Dual plumbing connections (215, 275 & 340.)
- Thermostat setting is between 60-75°. Maximum thermostat setting in order to maintain the warranty is 75°.
- MEPS Compliant
- 7 Year Warranty*
Product Range:
135 L with a 3 kW element as standard (suitable for up to 3 people)
180 L with a 3 kW element available (suitable for 4 people)
215 L with a 3.6 kW element (suitable for 5 people)
270 L with a 3.6 kW element (suitable for 6 people)
340 L with a 3.6 kW element (suitable for 7 people)
Important:
Where there is potential of damage occurring from a leaking system, a suitably fitted drain safe tray is required by the installer as per AS/NZS 3500.4 5.4 and G12/AS1 6.11.3.
Not suitable as a spa or pool heater. The 30L cylinder must be hard wired for external installation. *7 Year-limited warranty on cylinder. See Installation guide for more details.
Frequently Asked Questions
How long will my order take
Once you place an order with us, if the item is in stock, we will dispatch any orders before 12pm same day. After 12PM the following day. Our couriers are usually overnight, however depending on the courier workload, it can take up to 5 working days.
Any Bigger items by Freight truck usually takes 1-4 working days North Island. 4-8 working days South Island.
What size waste do I need for my bath & basin?
Unless a plumber has speicified a different size,
Basin Wastes are 32MMBath wastes are 40MM
What colours do our custom pieces come in?
Our vanities are available in Melteca from NZ panels. Choose from the Bestwoods or Primepanels ranges. Are vanities are alos available in any Resene paint finish.
Our Stonetops can be made in any Smartstone or Uniquartz Colour.
What is the difference between a 12volt and 24volt heated rail and ladders?
What is Low Voltage?
According to the Australia and New Zealand Standards – Electrical Wiring Rules AS/NZS 3000:2018 low voltage is anything "Not exceeding 12 Volts AC or 30 Volts ripple-free DC".
What does “Wet Area Suitable” mean?
Products that are “Wet Area Suitable” have a suitable IP (Ingress Protection) rating that enables them to be installed in what is classified as Zone 1 in the bathroom. See Bathroom Zones
Bathroom Zones
The Australia and New Zealand Standard AS/NZS 3000:2018 identifies the zones in a bathroom and the IP rating required for electrical items installed in each zone. The illustration shown here is a guide only, for full details please refer to Australia and New Zealand Standard AS/NZS 3000:2018.
