CONCRETE NATION MILOS RAW CONCRETE VESSEL BASIN - 4 COLOURS
Approx Lead Time:10 12 week leadtime may apply. Please enquire for accurate stock availability and leadtimes.
Please note:Concrete is a natural product and therefore subject to colour variations as well as slight markings or air pockets. This is the nature of concrete and is what makes our product beautiful.
Warranty Compliance:Solvents or liquids to remove/clean up silicon (especially around waste area) such as Fuelite cannot be used as it will break down the concrete sealer and void warranty.
Functional for Everyone
A Range of Styles
Frequently Asked Questions
How long will my order take
Once you place an order with us, if the item is in stock, we will dispatch any orders before 12pm same day. After 12PM the following day. Our couriers are usually overnight, however depending on the courier workload, it can take up to 5 working days.
Any Bigger items by Freight truck usually takes 1-4 working days North Island. 4-8 working days South Island.
What size waste do I need for my bath & basin?
Unless a plumber has speicified a different size,
Basin Wastes are 32MMBath wastes are 40MM
What is the difference between a 12volt and 24volt heated rail and ladders?
What is Low Voltage?
According to the Australia and New Zealand Standards – Electrical Wiring Rules AS/NZS 3000:2018 low voltage is anything "Not exceeding 12 Volts AC or 30 Volts ripple-free DC".
What does “Wet Area Suitable” mean?
Products that are “Wet Area Suitable” have a suitable IP (Ingress Protection) rating that enables them to be installed in what is classified as Zone 1 in the bathroom. See Bathroom Zones
The Australia and New Zealand Standard AS/NZS 3000:2018 identifies the zones in a bathroom and the IP rating required for electrical items installed in each zone. The illustration shown here is a guide only, for full details please refer to Australia and New Zealand Standard AS/NZS 3000:2018.